Title: 100-220V Microwave Radar Sensor Light Switch Motion Detector For Corridor Lamp

— Quite A Better Switch Than voice operated switch or PIR Switch!

Radar inductive switch, also called microwave induction switch, is based on the basis of the doppler effect, using the most advanced planar antenna, which can effectively suppress high order harmonics and other clutter interference, high sensitivity, reliability, energy-saving, safe and convenient, smart is the first selection of intelligent building and property management modernization products.Micro power consumption, complete function, can take all kinds of lamps and lanterns.
Can penetrate some nonmetallic material induction, especially suitable for hidden installation inside the lamps and lanterns.

Functions and features:

1. Intelligent induction:
when someone into the detection range of the products, microwave detector work lights, when people leave the detection range, lights automatically out.It can automatically identify day and night.

2. Smart delay: switch on the human body after each activity was detected in automatically postpone a cycle, and the last time to postpone time human activities as a starting point.

3. Work style: after the induction switch, the delay time, if there are any human activity, the switch will continue to get through, leave until people and postpone the time.

4. Photosensitive control: according to the light intensity of the outside world, to control whether the switch work, in order to achieve energy saving effect.

5. Compared with infrared products: radar switch induction distance is farther, perspective is wide, no dead zone, can penetrate glass, and wood veneers, according to different power, can penetrate the different thickness of the wall, and is not affected by environment, temperature, dust, etc, in 37 degrees above case, the induction distance not shortened, changes in the temperature sensing distance unchanged.Radar switch is an ideal upgrade infrared switch products.
Use scope: corridor, corridor, basement, garage, warehouse, monitoring, and other places of interior energy-saving automatic lighting (outside).

Technical parameters:

1. Working voltage: AC220V50Hz
2. The environment temperature: – 20 ° ~ + 60 °
3. Methods: high-power radar switch output relays)
4. Its power consumption: 0.2 W or less
5. Load types: incandescent lamps, energy-saving lamps, LED light source, etc
6. Load power:
incandescent lamp of 100w or less
Energy-saving lamps of 32 w or less
The LED 32 w or less
7. The delay time: 30 seconds (Adjustable)
8. Induction distance: less than 8 m
9. Induction Angle: 180 * 180, before the hemispheres

Megjegyzés:

1. Electric installation operation is forbidden, it is forbidden to load short circuit.
2. The excess load power use is forbidden.
3. When the wall thickness is less than 10 cm, this is likely to be partition induction switch.
4. In the sensing area, do not have obstacles or affect the detection of the motion of objects, the wifi signal may also affect the use of the switch.
5. Do not install in a volatile object as a base.
6.Close microwave signal switch and other strong electromagnetic radiation source will affect radar normal use, close to consider when buy radar switch to use the environment.In addition to the switch with the product specification above, no with other specifications and certificates, mind kiss please don’t shoot!This link baby description with detailed instructions and introduction.

Csomag tartalma:

1x microwave induction switch

—-( Alapértelmezésként véletlenszerű tétel / szín / típus kerül kiküldésre )

–Nincs eredeti doboz, biztonságos buborékos csomagolásban szállítjuk.

The Wiring Job: