Title: Residual Broken Screw Extractor Rusted Bolt Faucet /Mechanical Parts Remover Set
–When your Water faucet Or Screw of male head is rusty and aging, it breaks when it is screwed down, and some bolts remain on the pipe or Screw nut.
By Using this set will quickly and easily remove broken screws, pipes, bolts, and studs.
These extractors are made of high grade, heat treated steel and are great quality to keep around the house and in the garage. Great for at home use and professional craftsmen and mechanics!
These can be used with an electric drill or with a wrench.
Residual Broken Screw Extractor Rusted Bolt Faucet /Mechanical Parts /Auto Parts Remover Set
This Tools will Be Greatly Helpful for you!
–When your Water faucet （Dia Within 18mm） Or Screw of male head is rusty and aging, it breaks when it is screwed down, and some bolts remain on the pipe or Screw nut.
By Using this set will quickly and easily remove broken screws, pipes, bolts, and studs.
These extractors are made of high grade, heat treated steel and are great quality to keep around the house and in the garage. Great for at home use and professional craftsmen and mechanics!
These can be used with an electric drill or with a wrench.
Take off the water pipe triangle valve faucet use: according to the size of the water pipe, choose the appropriate extractor No. 7 or 8, put the threaded end of the extractor into the broken pipe, then use the movable spanner to hold the square end of the extractor tail, and rotate the extractor in counterclockwise direction, so that the broken pipe will be screwed out along the direction of the water pipe thread after clamping.
Use instructions for breaking/sliding bolts: According to the diameter of the fracture bolt to select the appropriate specifications of the drill bit in the center point of the broken bolt, smooth drilling a hole, and then choose the corresponding screw extractor insertion, with the Taper winch (1-5 remove need to use) or the active wrench (No. 6-8) counterclockwise smooth rotation, will break the bolt out.
The direction of the screw thread is positive, and the thread direction of the broken wire extractor is reverse. When the wire is taken out of the hole, the screw extractor is continuously twisted into the inner hole. When the screw reaches a certain degree of tightness, the screw turns along, because it turns the screw in the opposite direction, and naturally breaks the bolt.
特徴：
Heat Treated High Carbon Steel Construction
High Grade Steel
Corrosion-Resistant Finish
1# specification: 4.0mm (use range: 3-6mm)
2# specification: 4.5mm (use range: 6-8mm)
3# specification: 6.5mm (use range: 8-11mm)
4# specification: 7.5mm (use range: 11-14mm)
5# specification: 11mm (use range: 14-18mm)
use range — Inner Diameter
パッケージ内容：
1-5# Screw Extractor
—-( ランダムな色/タイプがデフォルトで発送されます )
レビュー
レビューはまだありません。