PTCチップの測定抵抗値: 約5Ωまたは16-18Ω

ユニット記載の番号・文字は実用意味を持たず参考情報です。

 

an electronic power consumption-free PTC (Positive Temperature Coefficient) starter. A PTC thermistor and a bidirectional silicon controlled are connected in series; meanwhile, one end of the PTC resistor and the G electrode of the bidirectional silicon controlled are connected with a control panel in parallel; the control panel is composed of a rectifier bridge, a capacitor and a resistor; the capacitor and the resistor are connected in parallel between the cathode and the anode of a rectifier bridge; and the alternating current end of the rectifier bridge is respectively connected with the G electrode of the bidirectional silicon controlled, the PTC thermistor and the connection terminal of the auxiliary winding of a compressor. The bidirectional silicon controlled is controlled by the charging characteristic of the capacitor to be triggered to be switched on and off so as to achieve the purpose of controlling current flowing through the auxiliary winding, thereby thoroughly solving the technical problem existing in the commonly-used starter that the auxiliary winding of the compressor and the starter still have power consumption in the normal operation stage after the compressor is started, and realizing the purpose of no power consumption in the true sense.

Description

ショッピングカートから「6 Pins QP2-4R7 Refrigerator Start Relay For Midea Wanbao Haier Homa Hisense LG」を削除.

SUMMARY

The object of The Start Relay is to overcome the drawbacks present in the prior art, to provide the normal operation after the startup phase to a compressor with virtually no power consumption of the compressor without electronic starter.

6ピン QP2-4R7 冷蔵庫スタートリレー（美的/萬寶/ハイアール/科龍/ハイセンス/LG対応）.

The Start Relay is not electronic power PTC starter circuit, using a trigger circuit board 4 instead of PTC resistor connected in series by a main triac port 4, while the triac control electrode 4 (G) and 3 is an end of the main PTC resistor connected in parallel with the energy-efficient resistor PTC sub starter sub PTC resistor, cleverly designed to positive, negative terminal connected in parallel between the capacitors, resistors, an AC terminal of the rectifier bridge of the rectifier bridge are each connected to a bidirectional controlled silicon electrode G and a positive temperature coefficient thermistor is connected to the compressor and the auxiliary winding terminal of the circuit, by the charging characteristics of the capacitor is controlled triac trigger turn on and off, into

ショッピングカートから「In+Out TC 20K 203 Air Conditioner Temperature Sensor For Haier,Large Freezer etc」を削除.

BRIEF DESCRIPTION

In+Out TC 20K 203 エアコン温度センサー（ハイアール対応）

In+Out TC 20K 203 エアコン温度センサー（ハイアール、大型冷凍庫等対応）.

ショッピングカートから「Electric Room Heater Stove 4Gears Knob Switch Rotary Selector Thermostat Control」を削除

FIG. 4 is equipped with the current art energy-saving compressor start circuit diagram of a starter

電気ヒーター4段階ツマミスイッチ 回転式温度調節器

The following embodiments in conjunction with embodiments of The Start Relay will be further described, the following examples only aspect of The Start Relay, The Start Relay is not limited.

Example

Electronic shown in FIG 1 PTC starter no power, it is mainly used to start the refrigeration compressor, the compressor windings Y normal operation of the main winding 1 and auxiliary winding 2, heat generated by the starter positive temperature coefficient sensitive resistors 3, 4 triac trigger circuit board consisting of P, positive temperature coefficient thermistor is connected to the auxiliary winding 2 of the compressor 4 groups 3 and triac in series, the positive temperature coefficient thermistor 3 the auxiliary winding of the compressor and the G 2 terminal is connected between the poles of the triac 4 parallel trigger circuit board P, the flip-flop circuit board P by the bridge rectifier 6, capacitors 7, 8 composed of a resistor, a rectifier bridge 6 positive, negative terminal between parallel capacitor 7, resistance 8, the AC terminal of the rectifier bridge 6 are each connected triac G electrode and a positive temperature coefficient thermistor 4 of the compressor 3 and the auxiliary winding connection terminals 2, a trigger circuit board P direct control of the triac 4 is turned on and off, so as to achieve through the secondary current of the control winding.

https://wa.me/8615360866221?text=WholesaleInquiry:TY-QZ-003-01 冷蔵庫用スタートリレー＋過負荷プロテクター（ハイアール、ハイセンス、ホマ向け）https://profixtips.com/zh/product/8007_ty-qz-003-01-starter/.

Briefly: When the power supply 10 to load the compressor, temperature control switch is closed to start the compressor to complete the triggering of the triac is turned on, the compressor start-up procedure implemented by the charging of the capacitor 7; when the temperature-dependent switch 9 after disconnection recovery program implemented by the discharge process of the starter resistor 8 of the capacitor 7, ready for the next start a compressor. Capacitor charging time is the start time of the starter start of the compressor, and the time of capacitive discharge resistor is the recovery time of the starter.

The capacitor charging is completed, the triac is turned off automatically after the compressor is started into the normal operation phase of the program ends, there is no way back to the auxiliary winding current flows in normal operation of the compressor stage, the starter and the compressor so that the auxiliary winding is not generating power. [0016] compared to that shown in the application of more current now, less energy-saving power starter i.e. FIG. 4, the present embodiment to a trigger circuit board 4 instead of the sub-PTC resistor 5, and a compressor startup program end into the normal operation phase, the auxiliary winding back road no current flows in the normal operation of the compressor stage, eliminating the power generated by the deputy PTC resistor 5, achieved without power in the true sense.