Title: 2x Universal Microwave Oven Magnetron Tube Pin Terminal For Galanz Midea Haier<\/p>\n

Used for Microwave Oven Magnetron Filament Terminal Connector Repair.
\nThis spare part suits many OEM brands including:
\nFor Midea, For Galanz, For Haier, etc.
\nEco-friendly, easy installation.
\nMade of high quality material, lasting many years.
\nPerfect accessories for microwave oven.<\/p>\n

S\u1ed1 (Th\u01b0\u01a1ng hi\u1ec7u) v\u00e0 K\u00fd t\u1ef1 tr\u00ean Thi\u1ebft b\u1ecb, Kh\u00f4ng c\u00f3 \u00dd ngh\u0129a Th\u1ef1c t\u1ebf, Ch\u1ec9 mang t\u00ednh Tham kh\u1ea3o!
\nMi\u1ec5n l\u00e0 ch\u00fang tr\u00f4ng gi\u1ed1ng ho\u1eb7c t\u01b0\u01a1ng t\u1ef1, ch\u00fang c\u00f3 th\u1ec3 \u0111\u01b0\u1ee3c s\u1eed d\u1ee5ng cho thi\u1ebft b\u1ecb c\u1ee7a b\u1ea1n!
\nN\u1ebfu k\u00edch th\u01b0\u1edbc v\u00e0 h\u00ecnh d\u00e1ng c\u1ee7a b\u1ed9 ph\u1eadn c\u0169 c\u1ee7a b\u1ea1n gi\u1ed1ng nhau, n\u00f3 c\u00f3 th\u1ec3 ho\u1ea1t \u0111\u1ed9ng cho b\u1ea1n!<\/p>\n

Specification:
\nFit for: Microwave Oven
\nPin number: 4 Pin
\nMaterial: Plastic
\nTotal Size\t5 x 3.2 x 2cm\/2″ x 1.26″ x 0.78″(L*W*T)
\nMounting Hole Dia\t3.<\/span><\/div>\n<\/div>\n

2x Universal Microwave Oven Tube Pin Magnetron Filament Terminal Connector Repair Part For Galanz Midea Haier<\/strong><\/p>\n

<\/div>\n
Used for Microwave Oven Magnetron Filament Terminal Connector Repair.<\/div>\n
This spare part suits many OEM brands including:<\/div>\n
For Midea, For Galanz, For Haier, etc.<\/div>\n
Eco-friendly, easy installation.<\/div>\n
Made of high quality material, lasting many years.<\/div>\n
Perfect accessories for microwave oven.<\/div>\n
<\/div>\n
\n
S\u1ed1 (Th\u01b0\u01a1ng hi\u1ec7u) v\u00e0 K\u00fd t\u1ef1 tr\u00ean Thi\u1ebft b\u1ecb, Kh\u00f4ng c\u00f3 \u00dd ngh\u0129a Th\u1ef1c t\u1ebf, Ch\u1ec9 mang t\u00ednh Tham kh\u1ea3o!<\/div>\n
Mi\u1ec5n l\u00e0 ch\u00fang tr\u00f4ng gi\u1ed1ng ho\u1eb7c t\u01b0\u01a1ng t\u1ef1, ch\u00fang c\u00f3 th\u1ec3 \u0111\u01b0\u1ee3c s\u1eed d\u1ee5ng cho thi\u1ebft b\u1ecb c\u1ee7a b\u1ea1n!<\/div>\n
<\/div>\n
N\u1ebfu k\u00edch th\u01b0\u1edbc v\u00e0 h\u00ecnh d\u00e1ng c\u1ee7a b\u1ed9 ph\u1eadn c\u0169 c\u1ee7a b\u1ea1n gi\u1ed1ng nhau, n\u00f3 c\u00f3 th\u1ec3 ho\u1ea1t \u0111\u1ed9ng cho b\u1ea1n!<\/div>\n
\u00a0<\/p><\/div>\n
\u00a0<\/div>\n
Specification:<\/div>\n
Fit for: Microwave Oven<\/div>\n
Pin number: 4 Pin<\/div>\n
Material: Plastic<\/div>\n
Total Size\t5 x 3.2 x 2cm\/2″ x 1.26″ x 0.78″(L*W*T)<\/div>\n
Mounting Hole Dia\t3.5mm\/0.14″<\/div>\n
Color: White<\/div>\n
\u00a0<\/div>\n
<\/div>\n
G\u00f3i h\u00e0ng bao g\u1ed3m:<\/strong><\/span><\/div>\n
\u00a0<\/div>\n
2 x Microwave Oven Tube Pin<\/div>\n
\u2014-( M\u00e0u s\u1eafc \/ Lo\u1ea1i ng\u1eabu nhi\u00ean s\u1ebd \u0111\u01b0\u1ee3c g\u1eedi theo m\u1eb7c \u0111\u1ecbnh )<\/div>\n
\u00a0<\/div>\n
<\/div>\n
Detection method of microwave oven magnetron:<\/strong><\/div>\n
\u00a0<\/div>\n
<\/div>\n
The magnetron is a key component of the microwave oven. It is mainly composed of a tube core and a magnet. The tube core is<\/div>\n
composed of a cathode, a filament, an anode, and an antenna (waveguide). Its working principle is: after the power is turned<\/div>\n
on, the 3.3V alternating current generated at both ends of the secondary filament coil of the high-voltage transformer<\/div>\n
supplies power to the magnetron filament. At the same time, the about 2000V AC high voltage generated by the high voltage<\/div>\n
winding is limited by the high voltage capacitor. After the diode rectifies, about 2000V DC high voltage is added to the<\/div>\n
anode of the magnetron to form an accelerating electric field (the anode is grounded, and the cathode is actually negative<\/div>\n
2000V). The electrons emitted from the cathode (direct heating and indirect heating, in Figure 2) are accelerated to the<\/div>\n
anode. In the process of accelerating the electron to the anode, it is also affected by the strong magnetic field in the<\/div>\n
vertical direction formed by the permanent magnet. Therefore, the electron is rotating and accelerating toward the anode<\/div>\n
(just like the movement of a bullet in a barrel). It also keeps getting faster. The anode is made into an internal gear<\/div>\n
shape, forming an even number of cavities, called resonant cavities. Each resonant cavity is a microwave resonator, and its<\/div>\n
resonant frequency depends on the size of the resonant cavity. The electrons oscillate when they pass through the fan-shaped<\/div>\n
cavity. And the frequency keeps increasing. When the frequency reaches 2400MHz, microwaves are formed, emitted from the<\/div>\n
waveguide port, and then transmitted to the furnace to heat the food.<\/div>\n
The quality of the magnetron is mainly to measure the filament (for the direct heating type is the cathode, most of which<\/div>\n
are currently the direct heating type). Including whether the inductance coil with the magnetic rod as the iron core is<\/div>\n
open, that is, the lead ends of the filament on the magnetron should be connected (but the resistance of the shell should be<\/div>\n
infinite), and the normal resistance should be less than 1\u03a9. This is also a sign of judging whether it is aging. The smaller<\/div>\n
the value, the better. If it is greater than 1\u03a9, it means aging. It is best to pay attention to the power and mounting pin<\/div>\n
position consistent with the original tube when replacing. If the power is too small, the original heating effect cannot be<\/div>\n
achieved (although the magnetron power has some room for adjustment); if the power is too large, it may damage the<\/div>\n
high-voltage converter or high-voltage rectifier diode. In addition, for the characteristics of the high-pressure fuse.<\/div>\n
Mainly it has a longer shape (4cm) and has a time-delay feature. It is installed in a special insulated fuse box and cannot<\/div>\n
be replaced by an ordinary fuse. Some people use the 3.15A time-delay fuse used in color TVs instead. Not only the fusing<\/div>\n
current is too large, it does not provide insurance, and its short length does not meet the high-voltage requirements.<\/div>\n
Filament cold resistance: use a multimeter, the same below. R\u00d71k block test, normally less than 1 Q (usually tens of m\u03a9, the<\/div>\n
resistance between the filament and the tube case is measured with R\u00d710k block, and it is normally infinite.<\/div>\n
\u00a0<\/div>\n
<\/div>\n
<\/div>\n
Large filament resistance is one of the common reasons for the low output power of the magnetron If the measured filament <\/strong><\/div>\n
resistance is large, do not easily judge that the magnetron is broken or aging. Practice shows that most of this situation <\/strong><\/div>\n
is the contact resistance formed after the magnetron filament pin or socket is oxidized and fouled.<\/strong><\/div>\n
\u00a0<\/div>\n
It is also the measurement error. It is usually caused by the contact resistance between the test lead of the multimeter and the measuring<\/div>\n
point, or the test lead and the socket. The problems of the magnetron itself are rare. Generally, only the service life has<\/div>\n
expired, long-term overload work or a few magnetic products with quality defects. This kind of failure can happen to the<\/div>\n
control tube. Therefore, when testing, the multimeter should be normal and the measurement method should be correct. Second,<\/div>\n
the magnetron pin should be sanded or scraped, and the dirt and oxide should be removed before measuring. If measuring the<\/div>\n
resistance If it is still large, it can be judged that the magnetron is bad.<\/div>\n
The open circuit of the filament is mostly caused by the damage of the magnetron itself. Generally speaking, it has to be<\/div>\n
replaced with a new tube. However, a few open circuit of the magnetron filament is caused by the lead wire unsoldering. When<\/div>\n
repairing, you can pry off the filament base, then use wire pliers to clamp the lead and the connecting piece, and then use<\/div>\n
a soldering iron to solder firmly.<\/div>\n
\u00a0<\/div>","protected":false},"excerpt":{"rendered":"
2x \u0110\u1ea7u n\u1ed1i ch\u00e2n Magnetron l\u00f2 vi s\u00f3ng \u0111a n\u0103ng d\u00f9ng cho Galanz Midea Haier<\/p>","protected":false},"featured_media":5095,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[60],"product_tag":[61],"class_list":["post-5094","product","type-product","status-publish","has-post-thumbnail","product_cat-appliance-accessories","product_tag-appliance-accessories","product_shipping_class-free-shipping","first","instock","purchasable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/product\/5094","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/comments?post=5094"}],"version-history":[{"count":0,"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/product\/5094\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/media\/5095"}],"wp:attachment":[{"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/media?parent=5094"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/product_brand?post=5094"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/product_cat?post=5094"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/profixtips.com\/vi\/wp-json\/wp\/v2\/product_tag?post=5094"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}