Title: 220V Temperature Controller Thermostat Adapter for Fish Tank Aquarium Heating

220V Digital Temperature Controller Thermostat Switch Adapter for Fish Tank Aquarium Plant Greenhouse Heating Control

This is a digital microcomputer temperature controller with led display screen. 
Wide temperature measuring range from -50℃ to 110℃ and temperature control range from -50℃ to 110℃, high accuracy. 
Easy setting, easy to install and use.  
Особенности:
Microcomputer intelligent digital temperature controller.
With led display to show the results clearly.
Wide temperature measuring range from -50℃ to 110℃ and temperature control range from -50℃ to 110℃, high accuracy.
Support delay start function and temperature correction function.
Made of fine quality material with strong durability, long service life.
Equipped with 1M water-resistant sensor for more convenient use.
Easy setting, easy to install and use. 
Widely applied to incubation, hatching area, equipment case, air conditioning system, temperature control protection, cabinet cooling system and other fields.

Характеристики:
Model: TY-1002
Материал: ABS-пластик
Цвет: Белый

Power supply: 220V 
–Please note that I have tested it myself and it does not work in countries and regions that use 110v voltage.

Load Power: Max 1500W
Temperature Measuring Range: -50℃~110℃
Temperature Control Range: -50℃~110℃ 
Temperature Measuring Accuracy: ±0.2℃
Temperature Control Accuracy: ±0.1℃
Measuring Input: NTC10K Water-resistant Probe L=1 Meter 
Output Type: Direct Output 
Output Capacity: 10A(Max)

Setup Parameter Table

Introduction to code and functions

PO Set startup temperature
Press the Set button to enter the internal menu. The default display is PO. Press the Set button again and use the up and down buttons to set the required starting temperature.

P1 sets stop temperature
Press the Set button to enter the internal menu. The digital display will be PO. Use the up and down buttons to switch to P1. Press the Set button again and use the up and down buttons to set the required stop temperature.

P2 Set temperature correction
Enter the internal menu in the same way, switch to P2 by pressing the up and down keys, press the set key again, and set the required calibration temperature by pressing the up and down keys. During the setting, if the detected temperature value is 0.5℃ higher than the actual temperature value, the calibration temperature to be set is -0.5℃. If the detected temperature value is 1℃ lower than the actual temperature value, the calibration temperature to be set is 1℃, and the detected temperature + calibration temperature = actual temperature.

P3 Set delayed start
Enter the internal menu in the same way, switch to P3 using the up and down keys, press the set key again, and use the up and down keys to set the required delay time (in minutes). Delayed start is generally used for compressor refrigeration. If it is used for refrigerators and freezers, this value needs to be set. The setting value is generally 3-6 minutes according to the compressor back pressure. If you are not using it to control the compressor or do not need the delay function, skip this item directly.

Комплектация В комплекте:

1 x Temperature Controller with Sensor Probe

Power supply: 220V 
–Please note that I have tested it myself and it does not work in countries and regions that use 110v voltage.